Best 10′ dado blade for table saw

Ridge Carbide TS2000 Super Table Saw Blade 10" 40 Tooth ATB/R .125 Kerf 5/8" Arbor

-26%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Feeds easily when used for moderate rips and crosscuts on a table saw.
• Raker tooth design for nearly a flat bottom cut.
• Smooth rip and cross cuts which eliminates the need for sanding.
• Large C4 carbide teeth allows to be sharpened up to 20 times.
• Please note that this is not the TS2000 Flat Top Box Joint Blade

Arbor Bearings Sears Craftsman 10" Belt Drive Table Saw Set of 2, 3509

-33%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• 5/8" ID, 35mm OD, and 11mm wide
• Fits Vintage Craftsman 113.xxxxxx model series belt drive contractor saws.
• Replaces Craftsman part number: 3509

TS2000 Heavy Duty 10” 24 Tooth Rip Table Saw Blade

-35%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Flat top OD top grind and 20° Face Hook for easy feed.
• Super Hard R C-4 CARBIDE gives long life and more sharpening.
• Heavy duty Full ⅛” kerf
• Smooth glue line cuts
• For RIP Cuts Only

8" Flat-Top Dado Saw Blade

-42%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• 8" x 24t x 5/8" bore

Band Saw Table Inserts Solid Aluminum 2-1/2" X 3/32" 2 Pack Fits DELTA ROCKWELL

-44%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Two Aluminum Inserts
• Measures 2-1/2 Inch Diameter X 3/32 Inch Thick
• Fits Delta, Rockwell, Jet Band Saws with same Plate Dimensions
• Close Profile for Clean Cuts.
• Aluminum will not Dull the Saw Teeth on your Band Saw Blade.

Precision Router Dado Jig

-18%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Make Perfect Fitting Dado Joints Quickly & Easily With Our New Jig!
• Solid aluminum contstruction for years of service
• Dado length limited only by the length of your straight edge clamp
• Makes accurate cuts up to 2" wide in 1/16" increments
• Will work with any handheld router that accepts Porter Cable style busings (1-3/16" base opening)

10" Fine Crosscutting Saw Blade

-15%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• C.N.C. laser cut premium steel body, individually heat treated for maximum strength
• Extra thick C-4 micro-grain carbide teeth for ultimate durability a cut quality
• Computer designed expansion slots keep the blade runing flat & true under pressure
• Nickel Armor coating protects the blades from rust, pitting and resin buildup for a long life

10" Micro-Kerf40 1/16"Kerf Table Saw & Mitre Saw Blade with 5/8" Arbor

-44%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• 1/16" kerf 10" diameter all purpose carbide tipped circular saw blade
• Thin as a dime - .060" kerf
• Minimal dust, noise and power consumption
• Made environmentally friendly in the USA
• Free instructional DVD and applications support

Ultra TS2000 10” 48 Tooth Combo Table Saw Blade

-31%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• The ultimate combo table saw blade
• Tooth design has 25 degrees ATB top grind and 5 degrees alternate shear face
• Cut hard and soft super slick on both rip’s and cross cuts
• Great blade for cross cutting plywood
• ATB design WILL NOT CUT A FLAT BOTTOM

TS2000 Thin Kerf All Purpose 10” 40 Tooth Combo Table saw Blade

-45%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• 4-ATB/1-Raker top grind 20° Face Hook for easy blade feed,cuts nearly a flat bottom
• Super Hard R C-4 CARBIDE gives long life and more sharpening
• No need for blade changing (one blade does rip, combo and crosscut)
• Super smooth finish rips and crosscuts and ends scratchy saw cuts
• Top Rated by American Woodworker, Fine Woodworking and Wood Magazine

10" TS2000 Flat Top Box Joint Blade

-20%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• All teeth are flat
• Cuts perfect flat bottom groove.
• Cuts Box and Finger joints
• Full ⅛” kerf
• Heavy duty design

HQRP Dust Collector Bag for DeWalt DW745, DW744, DW744X, DWE7491RS, DWE7480, 745, 744, 744x, 7480, 7491 10-inch Tablesaws/Planers+ HQRP Coaster

-33%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• HQRP&reg
• Dust Collector Bag with Wire Support Frame + HQRP&reg
• Coaster
• Helps keep work area cleaner
• Collects up to 70% of dust and particles
• Replaces Bosch part TS1004

Forrest Woodworker II 10" 48 Tooth

-30%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Premium carbide blades
• Micro-grain carbide teeth
• Maximum runout of .002"
• Rip and crosscut smooth and tear-out free
• Plate thickness of .090
• kerf 1/8"

LEECRAFT Zero Clearance Blade Insert for Jet Proshop Table Saw, Leecraft# JT-8

-19%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Fits Jet PROSHOP and Laguna Fusion table saws
• 14" x 4-1/8" x 3/8" thick
• Milled 1" wide blind dado pocket on the bottom of insert
• Melamine faced high density phenolic laminate
• Installation instructions included

Craftsman 10 in. Saw Blade Pack, 2 pk. 28T and 40T 29283

-46%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Heat-treated and tempered for optimum blade sharpness
• Carbide teeth last up to 10 times longer than regular steel teeth
• Durable carbide construction
• Anti-friction coating resists pitch and gum build-up for fast and cooler running

Anderson Box Joint Jig for table saw or router table

-19%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Eliminates complicated set-ups to cut multiple box joint fingers fast and accurately on one to four sides of a box at the same time.
• Set-up is simple and operation is easy to learn and perform. Produce box joints in just minutes after mounting and aligning the jig on your existing fence.
• The integral clamp secures one or more sides at the same time to accurately cut all the fingers without reclamping for full height of the box side.

DADO SHIM SET,MAGNETIC

-30%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Guaranteed not to fall off or get hung up on your saws arbor.
• Holds additional metal or plastic shims to dado blades.
• Includes two each of .010", .012", and .015" thick shims.
• Shims measure 3 3/16" O.D x 3/4" I.D.

Magnate HE092032T180ATB M2 Cold Saw Blade- 225mm Diameter, 32mm Bore – 180-BW Tooth Pattern

-41%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• For Cutting Stainless Steel Pipes/Tubes
• ~9" Diameter
• 180-BW Tooth Pattern
• 2.0mm Thickness
• 2/8/45 + 4/9/50 + 2/11/63 Pin Holes
• 32mm Bore

Mega Dado & Planer Router Bit

-23%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• 1/2" Shank, 2" cutter diameter, 1" cutter height
• Precision machined from fatigue-proof steel for extra strength
• Micro-grain carbide tips for a long life and repeated sharpening
• Silver PTFE coating reduces resin build-up for fast and easy cleaning
• 2+2 Shear Angle Geometry for clean cuts without fraying or torn edges

Arbor Bearings Rockwell Delta 9" & 10" Tilting Arbor Table Saws Set of 2

-16%

★★★★★

GO TO AMAZON

Amazon.com

Last update was on: April 3, 2025 3:23 am

• Set of 2. Replacement Arbor bearings for Rockwell/Delta 9" & 10" Table Saws with non-extended race Bearings.
• Bearings have a 17mm ID, 40mm OD, and are 12mm wide.
• Replaces Rockwell/Delta Part Numbers: 1086894, 920-04-020-5335, SP-5335
• 9" Models: 34-600(made after 1966), 34-605, 34-607, 34-609, 34-618, 34-619, 34-643, 34-644
• 10" Models: 34-338, 34-341, 34-348, 34-400, 34-402, 34-410, 34-426, 34-429, 34-430, 34-440, 36-426, 36-421, 36-430, 36-440, 36-441, 36-444, 36-445, 36-460, 36-470, 36-475, 36-477, 36-485