Best dewalt drill bit collar
Best results for dewalt drill bit collar
DEWALT DW1810 3/8-Inch Quick Change Mandrel (9/16-Inch to 1-3/16-Inch )
$9.88
$13.34
Last update was on: November 24, 2024 5:28 pm
- DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel
- DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins
- All quick change mandrels feature double set screws with a recessed combination head
- All quick change mandrels have been tested through 15,000+ cycles to deliver jobsite durability
- Pilot bits feature the patented DEWALT Pilot Point Tip for faster material penetration
DEWALT DWPVTSET Pivot Holder Set with Bit Bar, 10-Piece
$15.79
$20.68
Last update was on: November 24, 2024 5:28 pm
- Includes Best In Class most common Impact Driver Accessories
- Includes new Patented PIVOT HOLDER - Drive Straight or in Pivot Mode
- Ideal for any Applications where Impact Drivers are used
- All DEWALT Impact Ready accessories are designed and optimized to withstand the high-torque output of cordless impact drivers
Dewalt DCD771C2 20V MAX Cordless Lithium-Ion 1/2 inch Compact Drill Driver Kit
$99.00
$138.60
Last update was on: November 24, 2024 5:28 pm
- Compact, lightweight design fits into tight areas
- High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
- High speed transmission delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
- 1/2" single sleeve ratcheting chuck provides tight bit gripping strength
- Ergonomic handle delivers comfort and control
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 Ah
DEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch – 6-Inch)
$13.85
$17.73
Last update was on: November 24, 2024 5:28 pm
- DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel
- DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel
- All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes
- All quick change mandrels utillize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability
DEWALT DCF610S2 12-Volt Max 1/4-Inch Screwdriver Kit
Last update was on: November 24, 2024 5:28 pm
- N/A
- Imported
- The maximum initial voltage on 12-volt max batteries (measured without a workload) is 12-volts. Measured under a workload, nominal voltage is 10.8.
- Compact, lightweight design fits into tight areas
- 3 LED Lights provide visibility without shadows
- One-handed loading 1/4-inch hex chuck accepts 1-inch bit tips
DEWALT DW511 1/2 in. (13mm) 7.8 Amp VSR Corded Hammer Drill
$99.00
$115.83
Last update was on: November 24, 2024 5:28 pm
- 7.8 Amp motor provides high performance and overload protection
- Variable speed allows for precise hole placement on work surface
- Dual mode: hammerdrill/drill for wood, steel or masonry applications
- 4.3 lbs. - lightweight design for extended use and less user fatigue
- 360° side handle with depth rod offers greater control, versatility, and increased depth accuracy
DEWALT DW660 Cut-Out 5 Amp 30,000 RPM Rotary Tool with 1/8-Inch and 1/4-Inch Collets
$53.88
$75.43
Last update was on: November 24, 2024 5:28 pm
- DW660 Includes:1 drywall cutting bit and 1/4", 1/8" collets
- Turn-on/bump-off switch allows user to easily shut tool off
- 5-amp, 30,000 rpm motor provides more cutting power
- Slim body design for less fatigue over prolonged use
- Dust-sealed switch protects against dust ingestion for longer switch life
- 120v ac 5.0 amp
DEWALT DW1808 Long Holesaw Pilot Bit
$3.35
$4.89
Last update was on: November 24, 2024 5:28 pm
- DW1810 offers tool-free quick-release collar to prevent hole saws from locking to the mandrel
- DW1803 and DW1805 offer spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel
- All quick change mandrels utilize hardened steel construction and have been tested through 15,000+ cycles to deliver jobsite durability
- All quick change mandrels feature double set screws with a recessed combination head for quick and easy centering bit changes
DEWALT DW2505 Rapid Load Holder
DEWALT DWARAFS Right Angle Flex Shaft, 12"
DEWALT DWA2T40IR IMPACT READY FlexTorq Screw Driving Set, 40-Piece
DEWALT DCK277C2 20V MAX Compact Brushless Drill and Impact Combo Kit
Last update was on: November 24, 2024 5:28 pm
- DEWALT brushless motor delivers up to 57% more run time over brushed
- DCF787 20V MAX* Compact Brushless 1/4" Impact Driver
- Compact (7.52" front to back), lightweight design fits into tight areas
- DCD777 20V MAX* Compact Brushless Drill/Driver
- Compact (5.4" front to back), lightweight (2.0 lbs) designed to fit into small spaces
- Ergonomic comfort grip handle provides ideal balance and tool control and LED light with 20-second trigger release delay provides increased visibility in dark or confined spaces
DEWALT DWD525K 1/2-Inch VSR Mid-Handle Grip Hammerdrill Kit
$143.96
$185.71
Last update was on: November 24, 2024 5:28 pm
- 10.0 Amp motor delivers increased drilling performance
- Patented DEWALT built motor design generates 50% more power with increased overload protection for added durability
- Dual Mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications
- 2-Speed range for high speed drilling or high torque applications
- Mid-handle grip design with soft grip provides increased balance and comfort
Dewalt DWHT70265 Ratcheting T-Handle Set, 31 Piece
DEWALT ACCESSORIES DWAFV07SET 7 Piece, Carbide Hole Saw Set Kit
$64.99
$86.44
Last update was on: November 24, 2024 5:28 pm
- Increased Durability, Unique Tooth Design
- Set Pattern For Improved Metal Cutting Performance
- Faster Cuts, Longer Life, Steel Provides Increased Wear,
- Hardened Backing Plates Prevent Warping At Holes & Increase Cycles
- Deep Cut Style For Added Versatility
DEWALT DCST920B 20V MAX Lithium-Ion XR Brushless 13" String Trimmer (Bare Tool)
$129.00
$170.28
Last update was on: November 24, 2024 5:28 pm
- Brushless Motor maximizing motor efficiency and durability
- Dual 0.080" line with bump feed, with 13-inch cutting swath
- Variable trigger with speed control
- Patented gear drive design. With a 20V MAX 5.0Ah battery-DCB205,the string trimmer is easy to maneuver and puts less stress on the user
- Battery sold separately. Product arrives in two pieces and need to be assembled.RPM 0-4,600 / 0-6,000 rpm
- Battery & Charger Sold Separately
DEWALT DWA2SLS30 MAXFIT(TM) Screw Lock Set (30-Piece; with Sleeve)
Dewalt DCG412B 20V MAX* Lithium Ion 4-1/2” grinder (Tool Only)
Last update was on: November 24, 2024 5:28 pm
- 8,000 RPM motor provides high power for cutting and grinding applications
- Quick-Change Wheel Release allows for tool free wheel changes
- 2-finger trigger switch with lock-off button
- 2-position side handle for greater control, comfort & versatility
- Battery & Charger Sold Separately
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18