Best small table umbrella stand
Best results for small table umbrella stand
Sundale Outdoor Adjustable All Weather Umbrella Table Beach Patio Garden Poolside Accessory, 23in Diameter, Black
$65.50
$88.43
Last update was on: November 23, 2024 4:36 pm
- 【Fit Most Martket Umbrellas】This patio umbrella table fits 1.26, 1.34, 1.49 inches diameter market umbrella poles by using different size caps. Please pick the correct cap.
- 【High Quality & No Maintenance】The umbrella table is made of durable, maintenance-free, high-density polyethylene, which will not rust or chip and requires no maintenance.
- 【Easy Assembly Required】This umbrella table is quite easy to be assembled onto market umbrella poles with lock cap. Choose matched cap to fasten the table.
Original Umbrella Stand UMBSTDBLUE,Blue
$23.76
$33.74
Last update was on: November 23, 2024 4:36 pm
- Perfect for instant shade at sporting events, picnics, beaches, fishing, parks and the backyard. Use to hold fishing poles and flags too.
- 2 umbrella positions provide shade all day or use 2 umbrellas at once for ultimate protection from the sun.
- Easy to use – Sets up in 5 seconds or less. Simply step onto the spiked platform to insert into the ground.
- 1.5-inch diameter tubes with thumb screws to secure umbrella. Fits most beach umbrellas.
Umbrella Cone Wedge for Patio Table Hole Opening or Parasol Base Stand 1.9 to 2.7 Inch Umbrella Pole Diameter 1 1/2 Inch (Black)
$6.97
$9.27
Last update was on: November 23, 2024 4:36 pm
- ☛PRODUCT FEATURES: Prevents wind-induced tilting or shaking and helps your patio umbrella stay upright.
- ☛WIDELY USABLE: It is suitable for any patio table, sunshade, patio umbrella, or even more options are available.
- ☛SUITABLE SIZE: It is suitable for 1 1/2 inch /(38 mm)diameter umbrella rods
- the base diameter would be 1.9 to 2.7 inches.
- ☛DURABLE MATERIAL: It is made of weather resistant high-density rubber.
DGQ Patio Umbrella Cone Umbrella Wedge Plug Fits 1.5" Umbrella for Patio Table Hole Opening 2.5 Inch or Base 1.9 to 2.5 inch (Black)
$6.89
$8.20
Last update was on: November 23, 2024 4:36 pm
- ☂ UNIVERSAL FIT - DGQ Umbrella Cone works with any table and umbrella combination.
- ☂ MEASURE YOUR TABLE & UMBRELLA POLE BEFORE PURCHACING - Fits umbrella poles up to 1.5 inches in diameter
- table opening up to 2.5 inches or base 1.9 to 2.5 inch.
- ☂ HOLDS UMBRELLA IN PLACE - Tapered Design keeps the Umbrella properly seated and eliminates any rattles. This umbrella wedge might have a pre-cut seam at one side for better-fit the umbrella pole, and it works fine inside the patio table hole. No more swaying unbrellas on windy days with this patio umbrella cone!
Iwicker Patio Umbrella Side Table Stand, Outdoor Bistro Table with Umbrella Hole
$61.00
$82.96
Last update was on: November 23, 2024 4:36 pm
- Powder coated steel frame, rust-free and sturdy
- Rust-free steel top gives the table a hard surface to place drinks, snacks, or decor
- An umbrella hole in the table top for installing patio umbrella, fits up to 1.7 inch diameter umbrella pole
- Make a practical and stylish addition to your outdoor space
- Table size: 22"(L) x 22"(W) x 18.7"(H), simple assembly required
QIQIHOME Umbrella Cone Umbrella Wedge Parasol Base Stand Patio Table Hole Ring Plug (Black) (Black)
$7.48
$8.90
Last update was on: November 23, 2024 4:36 pm
- MEASURE YOUR TABLE & UMBRELLA POLE BEFORE ORDER. ★ Installation: 1. Draw out the umbrella and pole from the hole on the patio table. 2. Install the Umbrella Cone Wedge onto the umbrella pole. 3. Insert the umbrella and pole back to the hole on the patio table. 4. Spin and push the Cone Wedge downard gently in order to have it sinked into the hole compactly. (lube / oil / vaseline might help in doing this) 5. DONE
Myard MP UW38 Umbrella Cone Wedge Spacer fits Patio Table Hole Opening or Base 2 to 2.5 Inch, Umbrella Pole Diameter 1 1/2" (38mm, Black)
$5.95
$6.66
Last update was on: November 23, 2024 4:36 pm
- ★ MEASURE YOUR TABLE & UMBRELLA POLE BEFORE ORDER. ★ This umbrella wedge might have a pre-cut seam at one side for better-fit the umbrella pole, and it works fine inside the patio table hole.
- ★ Fits umbrella poles up to 1 1/2 inches (38mm) in diameter
- table opening 2 to 2.5 inches, or umbrella weight base hole diameter 2 to 2.5 inches (see images) ★Lubricating oil / soap-suds / vaseline / Sanding might be helpful in installation. ▼ No more swaying / wobbly umbrella.
Do4U Umbrella Cone Umbrella Wedge Parasol Base Stand Patio Table Hole Ring Plug (Brown, 1 Pc)
QIQIHOME Patio Umbrella Parasol Base Stand Hole Ring Plug Cover Cap 2.1 – inch (Black)
Shademobile Rolling Umbrella Base, Bronze
$147.00
$217.56
Last update was on: November 23, 2024 4:36 pm
- Fits 1-3/8-inch to 2-1/16-inch diameter umbrella poles
- Made of durable, maintenance-free, high-density polyethylene, which will not rust or chip and requires no maintenance
- Rolls easily on 4 high-quality non-marking wheels (2 are locking) which allow it to turn and pivot with ease
- Fill with Bricks, Sand or a combination of both up to 125 lbs. (not included)
- Made in the usa - not recommended for use with cantilevered (off-set) umbrellas
Christopher Knight Home 300413 Hercules 88lbs Umbrella Base w/Wheels & Stainless Steel Pole Handle
$110.35
$148.97
Last update was on: November 23, 2024 4:36 pm
- Includes: One (1) Umbrella Base
- Material: Concrete. Pole Handle Material: Stainless Steel
- Color: Black. Umbrella Holder Finish: Concrete
- Some Assembly Required Dimensions: 21.65 inches deep x 21.65 inches wide x 3.15 inches high
- Maximum diameter for open Umbrella - 11 feet
EliteShade Umbrella Base Stand Heavy Duty Market Patio Outdoor Umbrella Holder, Bronze
$34.88
$49.18
Last update was on: November 23, 2024 4:36 pm
- Made of durable cast resin with an anti-rust primer,aging resistance, wear-resistant, anti ultraviolet strong, permanently not corroded.
- Equipped with adjustable piston, a wide range of application, can be adjusted according to the thickness of the umbrella column.Umbrella Pole Diameter Range:φ1.53" - 1.92".
- With an attractive decorative pattern,help you enjoy your patio umbrella.
- Applicable: family, villa, hotel, terrace, balcony, resort, water park, barbecue bar, western restaurant, beauty salon, outdoor leisure area, company leisure area, company rest area, etc.
TropiShade 30 Pound Black Powder Coated Cast Iron Umbrella Stand
$79.00
$116.13
Last update was on: November 23, 2024 4:36 pm
- Cast iron umbrella base weight 30 pounds with a black powder coating
- 20 inches in diameter
- Euro Deco styled pattern
- One pole thumb screws secure umbrella in base
- Base tube is compatible with 1 3/8" and 1 1/2" umbrella poles
- Search " tropishade " for a compatible umbrella
Best Choice Products Heavy Duty 26-Pound Outdoor Steel Square Patio Umbrella Base Stand w/Decorative Basketweave Pattern, Black
$37.99
$43.31
Last update was on: November 23, 2024 4:36 pm
- SECURE AND DURABLE: Heavy-duty, 26-pound build and square design securely holds patio umbrellas in windy weather
- WEATHER-RESISTANT RESIN: The resin construction protects from rain and the sun's rays to ensure long lasting use
- FITS 1.5 TO 1.75-INCH POLES: Includes an adjustable knob to secure the umbrella into place
- STYLISH, DECORATIVE DESIGN: The basketweave pattern and rustic bronze finish complements any outdoor decor on your deck or patio, or any furniture in your backyard
QIQIHOME Patio Table Umbrella Thicker Hole Ring Plug and Cap Set (Black)
$8.89
$12.45
Last update was on: November 23, 2024 4:36 pm
- ❤Stabilizes, aligns, and protects patio umbrellas
- ❤Fits umbrella column with Dia. less than 1.63 inches.
- ❤Includes 2pcs plastic ring and 1 pcs fastner ring.
- ❤Prevents scratches and dents on umbrella pole caused by friction with the patio table
- ❤Help prevents umbrella from swaying caused by wind. Kindly notes- PLEASE DOUBLE CHECK THE SIZE OF YOUR UMBRELLA HOLE BREFORE YOU BUY,2.100% RISK FREE PURCHASE: Your satisfaction is guaranteed. We offer a 30 day no questions asked money back guarantee should any of our products not live up to your expectations. thank you!
Tropishade Steel Plate Umbrella Base, 36 lbs, Black
$79.00
$102.70
Last update was on: November 23, 2024 4:36 pm
- One solid A grade high durability steel plate it won't crack or break
- Low profile base less than 1" thickness so people don't trip on it
- 20" * 20" square size to increase the base stability. Base weight 36 lbs.
- Tube can fit 1 3/8", 1 1/2", 1 3/4" umbrella poles
- Black powder coating finish. HQ base Made in Taiwan
- Search " tropishade " for a compatible umbrella
Bememo 2 Inch Patio Table Umbrella Hole Ring and Cap Set, Standard Size Umbrella Thicker Hole Ring Plug and Cap Set (Black, 2 Set)
$6.99
$10.35
Last update was on: November 23, 2024 4:36 pm
- Material: made of good quality PVC plastic, not easy to break
- These umbrella hole rings are resistant to temperature and light-fast
- Suitable size: suitable for those umbrella poles of 1.65 inch in diameter or smaller
- And 2 inches ring diameter as standard size fits most umbrella hole tables
- Function: they are suitable for stabilizing patio umbrellas, reducing and preventing scratches or dents on unstable umbrella poles