The Best 1988 Mariner 115 Hp Water Pump Kit
Finding your suitable readers for 1988 mariner 115 hp water pump kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 1988 mariner 115 hp water pump kit including detail information and customer reviews. Let’s find out which is your favorite one.
977 reviews analysed
Quicksilver 96148Q8 Water Pump Repair Kit- Mercury and Mariner Outboards and MerCruiser Stern Drives
- Complete Replacement Water Pump Repair Kit
- Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury or Mariner outboard or MerCruiser stern drive.
- Kit contains pump housing assembly, gaskets, o-ring, plates, impeller, key, face plates, water tube guide sleeve plus gear lube fill and vent screw o-rings.
- Designed for durability to provide higher flow rates and cooling flow to protect your engine
This extensive kit fits Mercury and Mariner outboards from the 65 hp (4-cylinder) through V-6 outboards with short vane impellers. It also fits MerCruiser I, R, MR and Alpha One drives (serial number 2495186 through 0D469858). See your owner’s manual for replacement schedule. See your service manual for installation instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
Quicksilver Mercury Marine Mercruiser Water Pump Impeller Repair Kit for Outboard & Alpha One Sterndrive 46-96148A8
- Expansive kit to replace water impeller, upper and lower housings, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling.
- For select Mercury and Mariner outboards with short-vane impellers and select MerCruiser stern drives.
- One of the most complete kits available to repair outboard and stern drive water pumps. See your owner’s manual or service manual for specific applications and replacement instructions.
- Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Water pump repair kit 96148A8 is for Mercury and Mariner 65 hp (4-cylinder) through V-6 outboards with short-vane impellers. It also fits MerCruiser I, R, MR and Alpha stern drives (serial number 2491586 through 0D469858). The kit includes water impeller, plastic pump housing, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling. One of the most complete kits available to repair 4-stroke outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine original Equipment replacement engine parts, oils, and accessories, but also works to serve all original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
Quicksilver Water Pump Repair Kit 77177A3-2-Cycle Outboard – for Mercury and Mariner Outboards 30 HP – 70 HP
- Expansive kit to replace water impeller, upper and lower housings, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling.
- For select Mercury and Mariner 2-cycle outboards 30 hp through 70 hp.
- One of the most complete kits available to repair 2-cycle outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions.
- Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Water pump repair kit 77177A3 is for Mercury and Mariner outboards 30 hp through 70 hp. The kit includes water impeller, upper and lower housings, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling. One of the most complete kits available to repair 2-cycle outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine original Equipment replacement engine parts, oils, and accessories, but also works to serve all original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
Watts 500800 Instant Hot Water Recirculating System with Built-In Timer, Easy to Install
- WATTS HOT WATER RECIRCULATING PUMP: Provides hot water at every faucet or shower when needed, eliminating wasted water , 0.5 inches bypass value
- BEST SELLER RECIRCULATING SYSTEM: Conserve Water – Up to 15,000 gallons of water per year. Save Money – Up to 10% of your water bill and its cost only 5 a day to operate
- EAST TO INSTALL: This unique product connects easily to existing plumbing. Easy to install in less than 1 hour. And it is maintenance free
- WATTS HOT WATER RECIRCULATING SYSTEM: The Kit Includes: Pump with timer, 2 adapters with rubber washers, valve mounting screws, sensor valve, two 12-inch supply lines
- RECIRCULATING PUMP WITH TIMER: 24-hour programmable timer activates pump when you need it. And it is extremely quiet compared to other system in the market – no vibrations. Do not use with tankless water heaters. Insert the 115V plug on the line cord from the pump into a properly grounded 115V outlet
Product Description
Specification:
- Voltage: 120 volts
- Item Weight: 8.5 pounds
- Overall Dimension: 6.2 x 6 x 5 inches
- Size: Full
- Color: Blue
- Material: Case
- Warranty: 1 Year
Never wait for hot water again! The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. System that provides instant hot water to every faucet or shower in a home when you need it. Stop throwing money down the drain and waiting for your hot water.
From the Manufacturer
The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.
Grundfos 59896155 UP15-42 F 115V Brute 9H Recirculator Pump
- Cast iron Flow range – 0- 15.5 U.S. GPM, Head range -1- 15-Feet
- Ceramic shaft and radial bearings with Carbon axial bearing and Stainless steel rotor can and bearing plate
- Corrosion-resistant impeller, Composite, PES
- Type of connection: C.I. Flange / Pipe connection: 2 – Bolt Flange
- The motor is a 1-phase motor. No additional motor protection is required
Grundfos UP15-42F Circulator Pump (59896155) is a 1/25HP cast iron circulator pump designed for use in closed loop heating applications, such as radiant heating, baseboards, fan coils, etc. Features include a built-in motor protection for longer life and better performance. It is suitable for a wide range of applications, including radiant heating, hydronic heating, fan coil heating, solar and other system types. Grundfos circulation pump has a whisper-quiet operation for sound sensitive installations. Box includes (2) Gaskets (O-rings).
SEAFLO 33-Series Industrial Water Pressure Pump w/Power Plug for Wall Outlet – 115VAC, 3.3 GPM, 45 PSI
- UL 778 & CSA 22.2 Certified
- Self-Priming up to 6 vertical feet
- 3.3 GPM Flow Capacity, 115V AC Current Draw .75 amps (1.2 Max Amps)
- Built-in Adjustable Pressure Switch that turns on/off at 45 PSI
- Plugs into standard wall outlet with pre-installed power plug
Description
SEAFLO’s SFDPA1-033-045-33 has an incredible feature list, high quality components, and amazing performance. UL 778 & CSA 22.2 Certified. The three-chamber high volume design, driven by a heavy-duty motor produces flow rates of 3.3 GPM. It is capable of self-priming up to 6 vertical feet and can run dry making it the price to performance leader. Everything in pictures is included such as a 51S01 Filter – 1/2 NPSM Inlet/Outlet and a 51F01 Fitting – 1/2 FNPSM x 1/2 Barb. This pump also features an electrical cord which can connect directly to any standard US outlet making installation easy and simple. The 115VAC 33-Series can be used in a variety of applications and industries such as marine, boat, RV, industrial, and janitorial thanks to its versatility.
Details
BRAND NEW SEAFLO SFDPA1-033-045-33 Industrial Water Pressure Pump
Sleek finish in Orange and White SEAFLO colors
UL 778 & CSA 22.2 Certified
Plugs into your standard wall outlet for ease of use
Self-priming up to 6 vertical feet
Features an automatic pressure switch that can be adjusted
Built-in check valve
Capable of run dry operation
Ignition Protected
Suitable for food grade applications
**For best results, please use supplied fittings. If using metal fittings, use caution when tightening**
Technical specifications
Voltage: 115VAC
Flow Capacity: 3.3 GPM
Amperage Draw: 0.75 A (MAX 1.2 A)
Valves: Viton
Diaphragm: Santropene
Inlet/Outlet: 1/2″ Threaded MNPT
Dimensions: Approx. 7.98″ x 5.11″ x 4.84″
Grundfos 59896155 SuperBrute Recirculator Pump small RED
SEAFLO 33-Series Industrial Water Pressure Pump w/Power Plug for Wall Outlet – 115VAC, 3.3 GPM, 45 PSI
Grundfos 98420224 10-16 A PM BU/LC Comfort PM AutoAdapt Recirculation Pump
- Unique AUTOADAPT feature saving up to 48% heat energy and 96% motor energy compared with a standard pump in continuous operation
- Automatic weekend and vacation detection
- Automatic legionella eliminating operation (if supported from the system)
- Quick and simple electrical installation due to the highly reliable ALPHA plug
- Easy maintenance and cleaning through the easy-to-separate pump head fitting almost all competitor pump housings
The high-efficiency Grundfos Comfort PM range is a product for domestic hotwater re-circulation with lead free drinking water suitable pump housing for single- and two-family houses powered by a high efficiency single-phase, 12-pole, permanent-magnet motor. The AUTOADAPT function has been developed for domestic hot-water systems with hot-water tanks as primary heating source. In domestic hot-water systems with integrated temperature control functionality for raising and lowering the temperature on the recirculation pipe, Grundfos recommends using the COMFORT BX or COMFORT B models. To get the full advantages of the COMFORT AUTO model with the AUTOADAPT feature, Grundfos recommends installing the pump in systems with hot water storage tanks.
Generac 6917 CW10K Clean Water Pump with Hose Kit, 1"
- Lightweight design with ergonomic carry handle
- Powerful Generac 33CC engine
- Onboard instructions with icons of key touch points make this pump easy to use
- Easy Prime custom funnel design with tethered priming cap for quick and easy priming
- Easily pumps up to 30 gallons per minute
- Can not be shipped to the state of CA. Not CARB compliant
Generac’s CW10K is an all-in-one lightweight package that delivers the high-flow capacity you need to take on most pumping jobs! Startup is a snap with its custom Easy Prime funnel design, and color-coded suction and discharge ports; use it to remove standing water from small ponds, water gardens and hot tubs.
Conclusion
By our suggestions above, we hope that you can found 1988 Mariner 115 Hp Water Pump Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 1988 Mariner 115 Hp Water Pump Kit, eg:
- What are Top 10 1988 Mariner 115 Hp Water Pump Kit for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 1988 Mariner 115 Hp Water Pump Kit to buy?
- What are Top Rated 1988 Mariner 115 Hp Water Pump Kit to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 1988 Mariner 115 Hp Water Pump Kit?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 1988 Mariner 115 Hp Water Pump Kit.
- Before deciding to buy any 1988 Mariner 115 Hp Water Pump Kit, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 1988 Mariner 115 Hp Water Pump Kit and What you should consider when buying the 1988 Mariner 115 Hp Water Pump Kit and Where to Buy or Purchase the 1988 Mariner 115 Hp Water Pump Kit. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 1988 Mariner 115 Hp Water Pump Kit of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 1988 Mariner 115 Hp Water Pump Kit.