The Best Hurricane Concrete Anchors
Finding your suitable readers for hurricane concrete anchors is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for hurricane concrete anchors including detail information and customer reviews. Let’s find out which is your favorite one.
573 reviews analysed
Hard-to-Find Fastener 014973281267 281267, 1/4-20″, 12 Anchors
We stock a wide variety of fasteners ideal for many applications around the home, farm, business, automotive, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finish. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thoroughly and get the opinion of a licensed builder or certified building or structural engineer before relying on these fasteners for any situations where failure would result in damage to property or person.
Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors – 24 Pieces
- 1/4″-20 x 1-1/2″ Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel – 12 pieces
- 1/4″-20 Machine Screw Masonry Anchors – 12 Pieces
- Commonly used for storm windows and shutters to anchor into brick or masonry wall
- Fixtures can be removed or replaced without sacrificing holding power
- Corrosion resistant stainless steel screws with caulking type anchors designed to provide a quick setting in brick, concrete or stone
Red Head ITW 1/4 X 3-1/4" Hwh 410 ss Buildex Tapcon Stainless Steel Concrete Anchors
- FREE SHIPPING-All orders $25 or more ship for free
- buy more and save more
- BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
- FLAT PHILLIPS HEAD–Can be driven with Phillips Screw Driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Applications
The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/16″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A 5/16″ is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 3-1/4″
Thread Length
The length of the threads on the anchor is 1-3/4″ in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1/4″. This will ensure that the minimum embedment of 1″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 5/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 4″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3″ from an unsupported edge of the concrete.
Hurricane Hardware Stainless Steel Phillips Combo Drive Stainless Steel Sidewalk Bolt Kit with Masonry Anchors & Set Tool – 49 Pieces
- 1/4″-20 x 1-1/2″ Phillips Slotted Combo Drive Sidewalk Bolts 18-8 Stainless Steel – 24 pieces
- 1/4″-20 Machine Screw Masonry Anchors – 24 Pieces
- Includes Setting Tool for Proper Machine Screw Anchor Installation
- Commonly used for storm windows and shutters to anchor into brick or masonry wall
- Fixtures can be removed or replaced without sacrificing holding power
3/8" X 3-3/4" Stainless Wedge Anchor (10pc), 18-8 Stainless Steel
- HIGH QUALITY STAINLESS STEEL: Bolt Dropper Wedge Anchors are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater).
- ANCHORS YOU CAN DEPEND ON: Our concrete anchors are very strong and are great for both indoor and outdoor use. Whether you are attaching a boat lift to a seawall or securing a safe to concrete in your garage, you can depend on Bolt Dropper wedge anchors to hold.
- GREAT TO KEEP AROUND: Bolt Dropper wedge anchors are great to have around for when you need them most! Use in any application, any condition and any environment! Bolt Dropper anchors are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and long lasting!
- DIMENSIONS: Diameter: 3/8” | Length: 3-3/4″ | Thread Type: Coarse (standard) | Quantity: 10 pcs | Material: 18-8 (304) Stainless Steel
- LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE.
Sidewalk Bolt Stainless Steel 1/4 x 1-1/4 (Pack of 25)
- Low-profile head can remain in place when panels are down
- Hurricane bolts can also be referred to as sidewalk bolts
- These stainless steel, combo-drive sidewalk bolts measure 1/4″ in diameter x 1-1/4″ in length and come in 25 pieces per retail package
- The combo head is Slotted and Phillips. The bolt is 1/4-20 (thread is 20) and the diameter of the head is 3/4″
- Country of Origin: Taiwan
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
WIDGETCO 1/4" x 1" Screw Thread Protectors, White – Works w/Many Hurricane Shutters
1/4 inch x 1 inch White Screw Thread Protectors fit 1/4 inch (1/4-20) screws and bolts. Simply slide over the threaded end of the screw or bolt. Functions as a Thread Protector, Mask (for painting), Insulator, Decorator, Seal or to Color Code. Ideal for Hurricane Shutters.
Red Head ITW 1/4 X 2-3/4" HWH 410 ss Buildex Tapcon Stainless Steel Concrete Anchors
- FREE SHIPPING-All orders $25 or more ship for free
- buy more and save more
- BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
- FLAT PHILLIPS HEAD–Can be driven with Phillips Screw Driver
- SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
- DIAMOND POINT-Easier to drive the screw to save time
Applications
The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.
Hole Diameter/Bit Diameter
The anchor requires a 3/16″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A 5/16″ is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 2-3/4″
Thread Length
The length of the threads on the anchor is 1-3/4″ in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 1″. Therefore, the anchor must be installed so that a minimum of 1″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3/4″. This will ensure that the minimum embedment of 1″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 5/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 4″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 3″ from an unsupported edge of the concrete.
Conclusion
By our suggestions above, we hope that you can found Hurricane Concrete Anchors for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Hurricane Concrete Anchors, eg:
- What are Top 10 Hurricane Concrete Anchors for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Hurricane Concrete Anchors to buy?
- What are Top Rated Hurricane Concrete Anchors to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Hurricane Concrete Anchors?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Hurricane Concrete Anchors.
- Before deciding to buy any Hurricane Concrete Anchors, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Hurricane Concrete Anchors and What you should consider when buying the Hurricane Concrete Anchors and Where to Buy or Purchase the Hurricane Concrete Anchors. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Hurricane Concrete Anchors of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Hurricane Concrete Anchors.
