Best table saw feather guide
Best results for table saw feather guide
Kreg PRS3020 True-FLEX Featherboard, Pack of 2
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- This unique featherboard can be quickly and easily connected to a miter slot or t-slot without the need for additional hardware
- This product is easy to use easy to install and highly durable
- Item is manufactured in United States
- Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
- Each finger provides consistent and optimum pressure
- Made of an extremely durable plastic composite body
Featherboard, DRILLPRO Double Featherboards Feather Loc Board for Table Saws Band Saws Router Tables Fences Tools Miter Gauge Slot Woodworking
$27.21
$40.54
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- ❶Featherboard are Made from a HIGH-TECH POLYMER and each one has 13 ANGLED FINGERS that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.
- ❷4 MITER BARS that fit most standard miter slots (3/8 x 3/4 Inch). Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
- ❸This unique Featherboard can be quickly QUICKLY and EASILY connected to a miter slot or t-slot.
Kreg PRS3010 True-FLEX Featherboard – Single
$18.96
$24.46
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- The KREG true-flex feather board gets its name from the careful engineering that went into its design
- Many feather boards on the market apply too much or too little pressure to the work piece resulting in imperfect cuts and less than safe operation
- We've designed each finger of the true-flex feather board to provide consistent and optimum pressure and to stand up to years of use in your workshop
- KREG true-flex feather board comes with wedge-lock hardware which works in T-slots or miter slots on table saws, Router tables, band saws and more.
Milescraft 1407 D/TFeatherBoard Dual or Tandem FeatherBoards for Router Tables and Table or Band Saws
$26.69
$39.23
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- An innovative feather board design that provides consistent tension and maximum holding pressure created by unique split rail construction
- Pre-load tension design maintains consistent pressure across face of the feather board
- 2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts
- Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences
JessEm 4016 Feather Board Double
$44.95
$55.29
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- Double pack includes hardware for miter slot, T-slot, and tandem mounting
- Stackable for taller stock or work pieces
- Made of high impact molded plastic
- Feather tips molded with rounded edges and will not mark the work piece
- Miter Track and T-slot adjustments can be made separately from adjustments to the work piece
GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG
$57.10
$81.65
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- 3-Directional Force for Unmatched Control of the Work piece
- Moving-Blade-Guard Hand Protection
- Precise 1/4" Thin Rips
- The Stabilizing Plate provides 250% more stabilizing surface area. Like a featherboard, it keeps wood locked against the fence for a smooth cut – virtually eliminating binding.
- Virtually Eliminates Kickback
- Work with Small Stock Safely on the Table Saw, Router Table, Jointer, & Band Saw. The 1/8″ Leg fits all existing GRR-RIPPER models
Wnewtools FeatherBoard for Table Saws Band Saws Router Tables Fence preventing kick back,Pack of 2, Original Manufacture
$25.98
$30.40
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- The wedge-lock miter bars fit standard 3/4 Inch miter slots and T-bolts fit 3/8 Inch T-slot.
- The featherboards are made of an extremely durable plastic composite body and it will stand up to years of heavy use in your woodshop.
- Easy to use and adjust because of excellent engineering design.
- Every woodworker needs a professional featherboard,The featherboard works to keep workpiece press up against the fence whole time when you are cutting,giving a nice and clean cut on that edge.
QLOUNI Featherboard Double Feather Loc Board Adjustable Woodworking Feather-Loc for Router Table Saws Band Saws Fences Tools Gauge Miter Slot Working 1 Pair
$25.99
$28.85
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- ★[4 Metal Miter] 3/4-Inch and 3/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences, split rail miter bar construction that provides maximum hold
- ★[Wide Application] Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more
The Hedgehog Spiral Featherboard for Table Saws, Router Tables, and Band Saws
$32.00
$41.60
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- PLEASE NOTE: The Hedgehog fits 3/4-inch miter slots (most miter slots are 3/4-inch). Please confirm
- PRO TIP: If your miter slot is a bit wide, remove the miter clamp from the Hedgehog, insert a flat screwdriver into the slot in the clamp, and give it a little twist to make it a bit wider.
- Single knob and pivot point enables fast and easy adjustability with one hand. Loosen knob - spin the Hedgehog into the stock until the fingers flex - tighten knob - keep working. Fast and simple
Bench Dog 10-005 Feather-Loc Single Featherboard for Table Saws and Router Tables
$24.81
$31.51
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- Multipurpose featherboard for holding the stock against the guide fence
- Unique miter gauge slot allows quick removal
- Easy set-up feature
- High tech polymer ensures it will maintain its original shape
- Advanced design means no marring to your workpiece
BI-DTOOL Double Featherboards, Adjustable Feather Boards For Table Saw Bandsaw Fence Router Table And Table Saw Fence,Woodworking Router Table Accessories, Bandsaw Accessories, Pack Of 2
$24.49
$30.37
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- WIDELY APPLICABLE SIZE: Two widths Miter Bars（3/8 x 3/4 Inch）and t-slot bolts are applicable for most standard miter slots. And associated with wedge-lock hardware and split rail miter bar construction provide maximum hold for bandsaw table, router fence and more.
- RELIABLE MATERIALS: Our product is made from high-tech polymer and have special angled fingers so they can provide steady pressure which produces cleaner cuts with less chance of kickback, chattering or lifting.
DCT Miter Track Slot Fixture Hardware 12-Piece Kit, 3/4" x 3/8” Inch – Table Saw, Router, Disc Sander Feather Board Jig
$10.52
$15.67
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- BUILD YOUR OWN JIGS AND HOLD-DOWNS: The DCT Miter Track Slot Fixture Hardware 12-Piece Kit, 3/4" x 3/8” Inch – Table Saw, Router, Disc Sander Feather Board Jig is a fast way to build jigs and anchor accessories like feather (finger) boards, circle guides, hold-downs, and special jigs to your miter gauge track
- VARIOUS APPLICATIONS: Use the miter gauge track on a table saw, router table, disc sander, or any other tool with a standard 3/4-inch wide x 3/8-inch deep miter gauge slot
Safety Woodworking Push Block and Push Stick Package 5 Piece Set In Safety Orange Color, Ideal for Woodworkers and Use On Table Saws, Router Tables, Jointers and Band Saws
$17.50
$25.90
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
- Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
Bundle Taytools 640001 Set of 2 Pair Small Featherboards 7-1/2 Inch Wide x 3 Inch High, 1/2 Inch Thick with 2 Inches of Vertical Adjustment
$12.99
$14.42
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- This set of two small featherboards will work well on vertical fences or flat on a table surface
- Made of tough UHMW plastic
- Comes with two 1/4" hex head bolts and two knobs
- Overall sizes are 7-1/2” wide by 3” tall and 1/2” thick
- Maximal vertical adjustment is 2”
CLEAR-CUT TS™ STOCK GUIDES
$249.00
$306.27
Amazon.com
Last update was on: November 23, 2024 4:40 pm
- Mount to most commercially available table saw fence
- Setup is fast an easy!
- CNC machined from solid aluminium and anodized for appearance and durability.
- The guides have 3-1/8" of total vertical travel
- Accomodate a maximum stock thickness 13/16" and above.
